Product Bulletin 6/20
HME Energizer ® is a non-ionic surface active agent that provides uniform particle separation of drilling fluid additives.
Physical Appearance Clear Liquid
Specific Gravity 0.80
Weight: 6.71 pounds per gallon
Per Can: 33.53 net 37.5 gross
HME Energizer ® is specifically formulated to water-wet gilsonites, asphalts, lubricants, and spotting fluids in all water based muds. The product can often cure existing flotation of asphalts and gilsonites. HME Energizer also helps to prevent oil-wet barite in underbalanced horizontal drilling applications.
Drip feed 0.2 to 0.4 ppb HME Energizer® at pump suction to maintain homogenous drilling fluid. Or alternatively add one can for every 8 to 10 sacks of gilsonite or asphalt.
To cure flotation of gilsonites or asphalts, distribute 5 to 10 gallons of HME Energizer over the surface of each pit and agitate. Several treatments may be necessary depending upon severity.
To blend lubricants and spotting fluids into the active system, first blend 0.25 to 0.50 ppb of HME Energizer into the active system.
To help prevent oil wetting of barite, blend 0.25 to 0.75 ppb into the active system depending upon severity.
For use in all water based muds.
Detailed bioassay information available upon request.
Handle as a combustible industrial chemical, wearing protective equipment, and observe the precautions described in the Material Safety Data Sheet.
HME Energizer® is available in 24 gauge steel 5 gallon (U.S.) pails and 55 gal (U.S.) drums.
Packed 32 pails per pallet or 4 drums per pallet.
Keep away from sources of heat or ignition.
HME Energizer® is a registered trademark of Montello, Inc.